List of Publications – International Conferences

List of Publications
International Conferences
S.No
Authors
Tile of the Article
Name of the Conference
Year, Vol., No. Pages
1
Dr.PSS.Srinivasan
A Review on Phase Change Energy Storage System with PCM Materials and its ApplicationsInternational conference on Advances in Design and Manufacturing(ICAD&M;14)
ISBN 978-93-84743
12.03.2014
2
Dr.PSS.Srinivasan
Effect of Engine Performance and Emission Characteristics of Naturally Aspirated C.I Engine with Methyl Ester (Bio-Diesel) Blend as FuelsSecond International Conference on Resource Utilization and intelligent system, held at Kongu Engg.College,Perundurai,Erode,T.N.,India
pp.43-49
03.01.2008 to 05.01.2008
3
Dr.PSS.Srinivasan
Preparation of methyl ester(Bio-Diesel) from low cost transesterification unitSecond international conference on resource utilization and intelligent system, held at Kongu Engg.College,Perundurai,Erode,T.N.,India
pp.38-42
03.01.2008 to 05.01.2008
4
Dr.PSS.Srinivasan
Optimization of transesterification process for Bio-Diesel ProductionInternational conference & kk national conference on I.C. Engines and Combustion(ICONICE-2007), Jawaharlal Nehru Technological University,Kukatpatty,Hyderabad
06.12.2007 to 09.12.2007
5
Dr.PSS.Srinivasan
Technical Aspects of Bio-Diesel Production a ReviewInternational conference & kk national conference on I.C. Engines and Combustion(ICONICE-2007), Jawaharlal Nehru Technological University,Kukatpatty,Hyderabad
06.12.2007 to 09.12.2007
6
Dr.PSS.Srinivasan
Analysis of air change per hour (ACH) in single sided ventilated rooms for different opening using CFDInternational Conference on applications and design in Mechanical Engineering (CADME07) held at University of Malaysia, perils, Malaysia
25.10.2007 & 26.10.2007
7
Dr.PSS.Srinivasan
Relationship between Axi-symmetric bending solutions Of FGM Circular plates based on third order plate theory and classical plate theoryInternational College of Engineering Guindy Anna University
28.08.2006 to 30.08.2006
8
Dr.PSS.Srinivasan
An integrated approach using AHP/DEA and QFD for performance management In education serviceInternational Conf at CIT,Coimbatore
27.07.2006 to 29.07.2006
9
Dr.PSS.Srinivasan
Experimental Investigation of Hollow Clay Tile Laid Over Reinforced Cement Concrete RoofInternational Conf at CIT,Coimbatore
27.07.2006 to 29.07.2006
10
Dr.PSS.Srinivasan
Design and Performance Evaluation of Dynamic Vibration AbsorberInternational Conf at Kongu Engineering College, Perundurai, Erode
04.01.2006 to 06.01.2006
11
Dr.PSS.Srinivasan
Effect of hollow shape in heat transfer across Hollow Clay Tile (HCT) Laid RCC roof using CFDInternational Conf at Kongu Engineering College, Perundurai, Erode
04.01.2006 to 06.01.2006
12
Dr.PSS.Srinivasan
Non linear Bending of Tapered Functionally Graded Material PlatesInternational Kongu Engineering College, Perundurai, Erode
04.01.2006 to 06.01.2006
13
Dr.PSS.Srinivasan
Analysis Of Optical and Thermal Performances of a Three Dimensional Compound Parabolic ConcentratorInternational Conf at Kongu Engineering College, Perundurai, Erode
04.01.2006 to 06.01.2006
14
Dr.PSS.Srinivasan
Globally Competitive Eco - Friendly Technologies in Mechanical & Mechatronics EngineeringInternational Conf at Kongu Engineering College, Perundurai, Erode
04.01.2006 to 06.01.2006
15
Dr.PSS.Srinivasan
Three-dimensional thermo-elastic deformations of a functionally graded plate INCRUIS 2006 Kongu Engineering College, Perundurai
04.01.2006 to 06.01.2006
16
Dr.PSS.Srinivasan
Recent Trends And Issues In The Evaluation Of Appropriate Technologies For Integrated Rural Development INCRUIS 2006 Kongu Engineering College, Perundurai
04.01.2006 to 06.01.2006
17
Dr.PSS.Srinivasan
Transient Analysis of Temperature Distribution Inside the Heating OvenInternational Conference On Logistics and Supply Chain, ILSCM2004, PSG College of Technology
03.08.2004 to 05.08.2004
18
Dr.PSS.Srinivasan
Analysis of Vertical Spacing Between the Foodstuffs in Heating OvensInternational conference on Heat and Mass Transfer (ISHMT-2004), IGCAR, Kalpakkam
07.01.2004 to 09.01.2004
19
Dr.PSS.Srinivasan
Analysis of Temperature Distribution Inside the Heating OvenInternational conference on Heat and Mass Transfer (ISHMT-2004), IGCAR, Kalpakkam
07.01.2004 to 09.01.2004
20
Dr.PSS.Srinivasan
Analysis of Vertical Spacing Between the Foodstuffs in Heating OvensANSYS user conference Bangalore 2003 at Bangalore
03.11.2003
21
Dr.PSS.Srinivasan
Design and analysis of the proposed coupling for reducing torsional vibration-using AnsysProc. of FEDSM'03, 4th ASME-JSME Joint Fluids Engineering Conference, Honolulu, Hawalii, USA
06.07.2003 to 11.07.2003
22
Dr.PSS.Srinivasan
Characterising the Performance of Cricket Bat Using ANSYS/LSDYNAProc. of FEDSM'03, 4th ASME-JSME Joint Fluids Engineering Conference, Honolulu, Hawalii, USA
06.07.2003 to 11.07.2003
23
Dr.PSS.Srinivasan
Optimum design and analysis of vibration absorber for damped primary systemInternational Conference Alternative energy solutions for sustainable development and Nat.Renewable Energy Convention, PSG. Tech., Coimbatore
January 2003
24
Dr.PSS.Srinivasan
Phase change energy storage with PCM: Materials and ApplicationsANSYS India user's conference, ANSYS, Bangalore
07.11.2002 to 08.11.2002
25
Dr.PSS.Srinivasan
Ergonomics in the Design of bus footstepInternational Conference on Manufacturing Dhaka, Bangaladesh – ICM 2002
August, 2002
26
Dr.PSS.Srinivasan
Aerodynamic Analysis of Indian Mini Car using Finite Element MethodInternational Conference on Mechanical Engineering, Bangladesh university of Engineering and Technology, Dhaka
26.12.2001 to 28.12.2001
27
Dr.PSS.Srinivasan
Business people Re-engineeringInternational Symposium on Science and Technology, Science City, Calcutta
12.01.2000 to 14.01.2000
28
Dr.K.Visagavel
Improvement of air heater collector efficiency and reduction of thermal lower by using overlapped glass plate collectorInternational Conference on New millennium alternate energy solution for sustainable development & 26th National Renewable energy conversion for solar energy society of India held at PSG College of Technology, Coimbatore
Jan 17-19, 2003.
29
Dr.K.Visagavel
Design methodology of fluid power system for low cost automation4th International Conference on advanced Mechatronics, 2004. (ICAM 04) held at Robotics & Mechatronics Division Hiroshima University, Asahikawa, Mokkaido, Japan and the Japan society of Mechanical Engineering
Oct 3 to 6 2004
30
Dr.K.Visagavel
Design and fabrication of a Robot operated through telephone4th International Conference on advanced Mechatronics, 2004. (ICAM 04) held at Robotics & Mechatronics Division Hiroshima University, Asahikawa, Mokkaido, Japan and the Japan society of Mechanical Engineering
Oct 3 to 6 2004
31
Dr.K.Visagavel
A novel method of fabricating sensors and actuators for MEMS applicationsInternational Conference on “Systemics, Cybernetics and Informatics” held at Pentagram Research Centre, India
06-09, Jan 2005
32
Dr.K.Visagavel
Analysis of air change per hour (ACH) in single sided ventilated rooms for different opening using CFDInternational Conference on applications and design in Mechanical Engineering (CADME07) held at University of Malaysia, perils, Malaysia
25-26th Oct 2007
33
Dr.K.Visagavel
Risk evaluation of HOT environment and hazard analysis for steel melting shopInternational conference on “Technological Advancements in mechanical engineering” TAME-2014 held at Selvam college of Technology
14th & 15th Feb. 2014
34
Dr.K.Visagavel
Fabrication of hibiscus sabdariffa and agave sisalana fiber reinforced hybrid polyester compositeInternational conference on advance in design and manufacturing 2014 held at NIT, Trichy
December 5 - 7, 2014
35
Dr.K.Visagavel
Performance measurement and analysis of power generation industryAnnual International conference of the socity of operational management held at IIT,Rookee
December 12-14, 2014
36
Dr.M.Karthikeyan and K.Jayakumar
Role of HAZOP Study in Industry” in Process IndustryInternational Conference on Advances in Industrial Engineering Applications
December 12-14, 2015
37
Dr.H.Abdul Zubar
A Model for Supplier Selection using Analytic Network Process, Tenth International Conference On Operations And Quantitative Management (ICOQM -10) held at Symbiosis Institute of operations management, Nashik, 808-814
28-30 June -2011 pp
38
Dr.H.Abdul Zubar
Designing A Decision Support System to Evaluate and Select Suppliers Using Discriminant Analysis – A Case Study In Automotive Industry26th Indian Engineering Congress
16-18 December 2011
39
Dr.H.Abdul Zubar
Analysis of Vehicle Routing Problem With Pickup And Deliveries Using Sheep Flock Heredity Algorithm, International Conference on Advances in Supply Chain and Manufacturing Management, (ASCMM 2011)
December 16 - 18, 2011
40
Dr.H.Abdul Zubar
Supplier Selection Using Modified Interpretive Structural Modeling, International Conference on Advances in Supply Chain and Manufacturing Management, (ASCMM 2011)
December 16 - 18, 2011
41
Dr.H.Abdul Zubar
A VIKOR Multiple- Attribute Decision Method for Improving Supply Chain Leanness, International Conference on Quality and Reliability Engineering (ICQRE 2011)
20 -– 22 December 2011
42
Dr.H.Abdul Zubar
A multi criteria decision making for computer server product by using TOPSIS methodology, International Conference on Industrial Engineering (ICIE 2012)
January 29-31, 2012
43
Dr.H.Abdul Zubar
Fuzzy Vikor with Application to Supply Chain Leanness in Telecommunication Industry, International Conference on Industrial Engineering (ICIE 2012)
January 29-31, 2012
44
Dr.H.Abdul Zubar
A Multi Criteria Decision Making Approach for Suppliers Selection, International Conference on Modeling, Optimization And Computing (ICMOC2012),
April 10 -12, 2012
45
Dr.H.Abdul Zubar
An integrated group decision-making process for supplier selection, International Conference on Engineering Technology and Management, ,
September 7-8, 2012
46
Dr.H.Abdul Zubar
A simple warehouse location problem using Hub modelInternational Conference on Production and Industrial Engineering (CPIE 2013)
March 29-31, 2013,
47
Dr.H.Abdul Zubar
An Integrated Multi-Objective Decision Making Process for Supplier Selection, International Conference on Production and Industrial Engineering (CPIE 2013)
March 29-31, 2013
48
Dr.H.Abdul Zubar
Optimization of Pulp Parameters in the Paper Industry Using Taguchi Method, International Conference on Productivity and Quality Research ,
12 - 15 December 2005
49
Dr.H.Abdul Zubar
Application of Fuzzy Controller for the Model Building of Preparation of Pulp Parameters in Paper Industry, , International conference on ICORAID
27 – 29 December 2005
50
Dr.H.Abdul Zubar
Drivers Affecting Eco Design in Supply Chain,Second International Conference On Advances In Industrial Engineering Applications -ICAIEA 2014
March, 2005
51
Dr.H.Abdul Zubar
Application of RQFD in Evaluating Green Supply Chain, Second International Conference On Advances In Industrial Engineering Applications -ICAIEA 2014
May, 2015
52
Dr.H.Abdul Zubar
Performance Measurement and Analysis of Power Generation Industry, XVIII Annual International Conference of the Society of Operations Management (SOM 2014)
July, 2015
53
Dr.H.Abdul Zubar
Green Supply Chain Performance Evaluation Model by Integrating Fuzzy AHP and Fuzzy VIKOR Methods, International Conference on Advances in Design and Manufacturing (ICAD&M'14)
December 5-7,2014
54
Dr.H.Abdul Zubar
Analysis of Body Postures of Employees in Bearing Manufacturing Industry By Using Ergonomic Tools, International Conference on Advances in Design and Manufacturing (ICAD&M'14)
December 5-7,2014
55
Dr.H.Abdul Zubar
Design and Fabrication of Tube and Bundle Heat Exchanger using Neolyte Solution in Annealing and Pickling Line, International Conference on Advances in Design and Manufacturing (ICAD&M'14)
December 5-7,2014
56
Dr.H.Abdul Zubar
Drivers Affecting ECO Design in Automobile Industry:The ISM Approach, International Conference on Smart Technologies for Mechanical Engineering, (STME-2013)
October 25 -26, 2013
57
Dr.H.Abdul Zubar
Safety, Health, Environment and Ergonomics (SHEE) Failure Mode Effective Analysis,International Conference on Advances in Design and Manufacturing (ICAD&M'14)
December 5-7,2014
58
Dr.H.Abdul Zubar
Prevention of Accident Occurrence in Manufacturing Industries, International Conference on Advances in Design and Manufacturing (ICAD&M'14)
December 5-7,2014
59
Dr.H.Abdul Zubar
Implementation and Evaluation of Lean and Green Manufacturing in Indian IndustriesInternational Conference on Advances in Design and Manufacturing (ICAD&M'14)
December 5-7,2015
60
Dr.H.Abdul Zubar
Integrated Supply Chain Performance Measurement Techniques - A Review, International Conference on Advances in Design and Manufacturing (ICAD&M'14)
December 5-7,2014
61
Dr.H.Abdul Zubar
Analysis of Heat Transfer Co-Efficient of Copper Based Water Nanofluid Using Double Pipe Heat Exchanger, International Conference on Advances in Design and Manufacturing (ICAD&M'14),
December 5-7,2014
62
Dr.H.Abdul Zubar
Evaluation of Safety and Health Hazards in Foundries Using HIRA, International Conference on Advances in Design and Manufacturing (ICAD&M'14),
December 5-7,2014
63
Dr.H.Abdul Zubar
Optimization of Reheating Furnace Temperature in Hot Rolling Mill, XVIII Annual International Conference of the Society of Operations Management (SOM 2014)
December 12-14, 2014
64
Dr.H.Abdul Zubar
Drivers and their Contribution to Implement Eco Design in Indian Industry A fuzzy TOPSIS ModelThird International Conference on Industrial Engineering ICIE 2015
November 26 ~ 28, 2015
65
Dr.M.Karthikeyan and K.Jayakumar
Role of HAZOP Study in Industry” in Process IndustryInternational Conference on Advances in Industrial Engineering Applications
Jan 2010
66
Dr.M.Karthikeyan, T.Ramachandran and O.L.Shanmugasundaram
Preparation and characterization of nanoencapsulated phase change materials containing paraffin wax and application to cotton fabric against thermal hazardsInternational conference on textile fibres and electrochemistry sciences
March 21-23, 2013
Share this Info                                      Tweet about this on TwitterShare on FacebookGoogle+Digg thisShare on RedditShare on LinkedInEmail to someone
Menu